REL-MR-110DC/21HC AU

https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in miniature power relay, with multi-layer gold contact for high continuous currents, 1 PDT, input voltage 110 V DC Your advantages  RT III-proof (wash-proof)  Switching current of up to 16 A Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4017918937959 Weight per Piece (excluding packing) 15.560 g Custom tariff number 85364900 Country of origin Austria Technical data Dimensions Width 12.7 mm Height 29 mm Depth 15.7 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 08/22/2020   Page 1 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Technical data Coil side Nominal input voltage UN 110 V DC Typical input current at UN 4.1 mA Typical response time 7 ms Typical release time 3 ms Coil resistance 26600 Ω ±15 % (at 20 °C) Power dissipation for nominal condition 0.45 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Switching capacity 2 A (at 24 V, AC15) Contact side (with destroyed gold layer) Contact material AgNi Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V Minimum switching voltage 12 V (at 10 mA) Limiting continuous current 16 A Maximum inrush current 50 A (20 ms) Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 384 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W (at 220 V DC) 4000 VA (for 250 V AC) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 2 A (at 24 V, AC15) 08/22/2020   Page 2 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Technical data Contact side (with destroyed gold layer) 2 A (at 120 V, AC15) 2 A (at 250 V, AC15) General Test voltage relay winding/relay contact 5 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life 3x 10 cycles Service life, electrical see diagram Mounting position any Assembly instructions Can be aligned without spacing (> 70 °C ≥ 2.5 mm) 7 Connection data Connection method Solder connection Standards and Regulations Connection in acc. with standard CUL Standards/regulations IEC 60664 EN 50178 EN 61810-1 Pollution degree 3 Overvoltage category III Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 08/22/2020   Page 3 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Diagram Operating voltage range 08/22/2020   Page 4 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Diagram Interrupting rating 08/22/2020   Page 5 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Diagram Electrical service life 08/22/2020   Page 6 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Diagram Service life reduction factor with various cos phi Circuit diagram 08/22/2020   Page 7 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Classifications eCl@ss eCl@ss 10.0.1 27371601 eCl@ss 4.0 27371100 eCl@ss 4.1 27371100 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 UNSPSC 18.0 39122334 UNSPSC 19.0 39122334 UNSPSC 20.0 39122334 UNSPSC 21.0 39122334 Approvals Approvals Approvals UL Recognized / cUL Recognized / VDE Zeichengenehmigung / EAC / EAC / cULus Recognized Ex Approvals 08/22/2020   Page 8 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 228652 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 228652 VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx  40007758 EAC      TR_TS_D_00573_c EAC      RU*CDE.*08.B.00010 cULus Recognized       Accessories Additional products Relay base - PR1-BSC2/2X21 - 2833518 Relay base PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 2/2 level design, screw connections, connection facility for input/interference suppression modules     08/22/2020   Page 9 / 10 https://www.phoenixcontact.com/us/products/2961561 Single relay - REL-MR-110DC/21HC AU - 2961561 Accessories Relay base - PR1-BSC3/2X21 - 2833521 Relay base PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 1/3 level design, screw connections, connection facility for input/interference suppression modules     Relay base - PR1-BSP3/2X21 - 2833534 Relay base PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 1/3 level design, spring-cage connections, connection facility for input/interference suppression modules     Relay base - RIF-1-BPT/2X21 - 2900931 RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5     Relay base - RIF-1-BSC/2X21 - 2900930 RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 08/22/2020   Page 10 / 10